Thesaint7811 Posted March 25, 2014 Report Share Posted March 25, 2014 I am trying to download the Arduino package from the VIPM and they won't seem to connect. I have included a picture of the error and two more of my settings. I am using the student evaluation of the Labview software, but I'm not sure that it is what's causing the problems. Any help would be appreciated, as I would like to set up a nice GUI using labview and an arduino as my DAQ device. I need this for a project for my professors so I am rather desperate to get it up and running. Link to comment Share on other sites More sharing options...
Ashish Posted March 25, 2014 Report Share Posted March 25, 2014 Hi, Please refer this article and see if you missed anything: http://support.jki.net/entries/21447601-Resolving-issues-with-VIPM-connecting-to-LabVIEW Link to comment Share on other sites More sharing options...
Thesaint7811 Posted March 25, 2014 Author Report Share Posted March 25, 2014 Hi, Please refer this article and see if you missed anything: http://support.jki.net/entries/21447601-Resolving-issues-with-VIPM-connecting-to-LabVIEW So I checked the article and adjusted everything the way it says too, even double checked, and still i'm not getting it to work. Link to comment Share on other sites More sharing options...
Ashish Posted March 25, 2014 Report Share Posted March 25, 2014 Can you send screenshot of "VIPM port list configuration"? Also, disable your firewall, antivirus and try again. Link to comment Share on other sites More sharing options...
dpcamargo Posted April 1, 2014 Report Share Posted April 1, 2014 I'm hijacking this post because i'm having the exact same problem on one of my notebooks. I gave permission for LV and VIPM on firewall, disabled firewall, made all the configurations needed on LabVIEW, changed the TCP Port, and I'm still not able to connect VIPM to LV. Screenshots below. VIPM configuration: VIPM error: LV Configuration: LV Configuration 2: Firewall disabled: Thanks for your help, Dario Camargo Link to comment Share on other sites More sharing options...
Ashish Posted April 1, 2014 Report Share Posted April 1, 2014 Please try the following. 1. Click Start in windows. Type: "allow a program through windows firewall" then select it. 2. See attached image. Make sure LabVIEW 2012 and VIPM are added to this list and are allowed to communicate through the windows firewall. 3. Try the connection to LabVIEW from VIPM to see if this works. Link to comment Share on other sites More sharing options...
dpcamargo Posted April 3, 2014 Report Share Posted April 3, 2014 That still didn't work. LV was already added to the firewall allowed list, so I just had to add the VIPM. Link to comment Share on other sites More sharing options...
Ashish Posted April 3, 2014 Report Share Posted April 3, 2014 Try running VIPM with "Run As Administrator" privileges as described in this link: http://support.jki.net/entries/21430776-VIPM-fails-to-launch-after-splash-screen-on-Windows Link to comment Share on other sites More sharing options...
dpcamargo Posted April 3, 2014 Report Share Posted April 3, 2014 No success running as administrator. I reinstalled VIPM and it didnt fix the problem. Link to comment Share on other sites More sharing options...
Ashish Posted April 4, 2014 Report Share Posted April 4, 2014 Please send us an email on "support@jki.net" for more dedicated help in solving this issue. Link to comment Share on other sites More sharing options...
Michael Aivaliotis Posted April 4, 2014 Report Share Posted April 4, 2014 usually putting a * in the machine access list is enough. did you restart your machine? Link to comment Share on other sites More sharing options...
dpcamargo Posted April 4, 2014 Report Share Posted April 4, 2014 Yes Michael, I've had this problem for quite some time and had already done most of the suggestions a while ago. Link to comment Share on other sites More sharing options...
winnie Posted April 16, 2014 Report Share Posted April 16, 2014 me too!!!! How to solve this problem!!!! Link to comment Share on other sites More sharing options...
grubin698 Posted July 9, 2014 Report Share Posted July 9, 2014 I'm having the same issue. EDIT: after updating VIPM, I was able to successfully install something. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.