Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 08/21/2018 in Posts

  1. 2 points
    Ideas and Features: Add other commonly used controls that aren't supported Clusters, arrays, subpanels, decorations, etc. Add more advanced controls Animated Menu Toggled controls (such as one button that does start + stop function) Custom Radio Selectors (paging/tabbing) Draggable Navbar UI templates Merge VIs Other commonly used modern UI building blocks Let us know if you have any others! Post an Idea or Feature Request Now.
  2. 1 point
    Hi all, First, thank you JKI for your great tool that makes the design of my UIs so much easier! I successfully added my own themes and controls to the JKI Design Palette but I noticed some controls are not supported. Arrays and clusters with no elements: data structures like arrays and clusters require to have elements to be added to the Palette. Adding arrays or clusters that don't have elements make all the controls in the JKI Design Palette disappear as shown below. In the future, I think it would be great to be able to add our own arrays and clusters that don't have a type to the Palette. Decorations: decorations can't be added to the Palette. I tried to add my own decorations to the Palette and it looks like they are not supported. It didn't make the other controls disappear like above but I think it would be a great improvement to have access to decorations (classic or our own) via the JKI Design Palette. Best, Benoit
  3. 1 point
    My welcome screen looks ugly. Why is the font way too large for the allocated space, see picture? (LV 2019, Windows 10)?
  4. 1 point
    Local configuration, FYI: Windows 10 font scaling is at 100% LabVIEW fonts are all defined as "tahoma 13" in ini.
  5. 1 point
    That's to protect privacy... But seriously, thanks for letting us know. Font sizings can get a little wonky in LabVIEW. We'll see if we can fix this.
  6. 1 point
    I have a type def'd enum (not strict) and I want to change the style of it from classic to the JKI Flat one for my UI. Using a quick drop shortcut, I can easily change from system, to NXG, to classic, etc. The JKI flat controls don't show up in quick drop (as far as I can tell?) so I can't use the ctrl+p shortcut to replace it. I can use the right-click menu and navigate to where the control is on disk and replace it that way, but then it loses all of the items in the enumeration. Is there any way to support the same quick drop replacement shortcut to maintain enum items? (I know that I can use the Item Names property to recreate the enum, and that's what I did for my application, but it would be nice to have the same functionality for the Flat UI controls.)
  7. 1 point
    I think I might be able to share this specific utility I'm working on. It's a very small piece in the big picture of what I'm working on, and I use little utilities like this to try out new toolkits, modules, or LabVIEW components to see what might be worth bringing into our more mainstream code. In this case, the utility I'm working on is an accuracy specification management tool. I can probably post a few screenshots and thoughts on the UI development once I finish it up.
  8. 1 point
    Ah, I got it... See if this works -- I just tried it on my computer and I think it does... 1) Open your type definition in the control editor (right click on it and choose Open Type Def.) 2) In the control editor, select the enum... 3) Follow steps #1-4 in my previous post. 4) Save+close the type definition Does that do it?
  9. 1 point
    Another minor thing, the button behaves differently from the buttons in the built in path controls. Clicking the button will always trigger the file dialog prompt, versus the other buttons which won't open the dialog if the Mouse Up doesn't happen on the button. Update: Fixed file posted below:
  10. 1 point
    Story of my life when dealing with LabVIEW UI elements... Thanks for the explanation - I'll keep that in mind when placing buttons on my UI. I tend to put icon-only buttons in the horizontal mode for space saving, or I'll put the text underneath an icon similar to the ribbon in Microsoft Applications, or the left-bar in their newer applications (Teams). Combination of icon and text center aligned in a Laid Out Horizontally layout, and stacked vertically in the same space: Icons and Text all center aligned: Of course, this all heavily depends on how the user plans on interacting with the UI. In my case, the applications I'm working on a very document centric and have lots of configurations and menus, similar to Office applications. To keep the layout familiar to the user, I mimicked the Ribbon and File Menu ideas. Thanks for being so receptive to the feedback. I can tell just how much painstaking pixel pushing work went into these UI elements and am really loving the look and feel (and built-in color customization!) of the new controls.
  11. 1 point
    I get this error when trying to submit feedback from the Design Palette: Could be related to me having to do an offline activation?
  12. 1 point
    I'm using Open AF Method plugin and today when I installed Design Palette with Flat UI 2.0 I noticed that whenever I click on Open Method.. popup menu option, Design Palette gets opened too. It's annoying to close it every time I go from "Send message" vi to the method. Cheers, Patryk
  13. 1 point
    Yes, I meant Quick Drop, but couldn't remember its proper name. I'm using the latest version of JKI Design Palette. However, the problem disappeared. It seems that it disappeared after I first tried Ctrl+Alt+Space to pop up the Design Palette. After that Ctrl+Space correctly opens Quick Drop window.
  14. 1 point
    An easy way to do a super simple resizeable UI, I think, is to use splitter bars and then choose one pane that has some kind of big UI element that is easy to resize like a graph that you can just set as "size to pane". Then set the sticking of the splitter bars so that one pane is the only one that changes size on panel resize events and all others stay the same. Then you don't have to worry about scaling all the little buttons and dealing with decorations getting pixelated. But for a tab control, yeah there is no easy way sadly (at least that I know of). For this, I usually just use radio buttons as the tabs and then a subpanel and switch out which VI is displayed in the subpanel based on the radio buttons.
  15. 1 point
    I knew there should be an alternative 🤓
  16. 1 point
    The design palette seems to work well for Boolean buttons, but is more difficult to use for other controls. For example, if I type "graph" I get firstly various buttons, then a number of graphs, but there's no way to tell what type of graph: waveform, XY, Intensity - even a chart gets shown here (because the filename on disk includes the word "Graph"). Suggested enhancements: text showing the name of the control currently selected (or under the pointer) in the same way as the LV Control menus the list of control types filtered to show only those which are part of the current search (same as the sizes are only those relevant) where the search text is a standard control type, then those are shown first before buttons that also match the text - and/or ability to sort by type rather than theme a list of other words relevant to the current search that can quickly be clicked on to limit the options shown, either sorted alphabetically or by frequency of use
  17. 1 point
    First of all: Thanks for another great LabVIEW tool - highly appreciated! It seems that the ports you are using to activate the design palette and/or download the content is blocked by our corporate network. Using my private internet I could activate it properly, but back again in the company network I get an error message again when I am starting the palette the first time. Would it be possible for you to use other, usually open ports? Or at least let us know which ports need to be opened?! Is there any plan when we can expect the palette for the 64 bit version of LabVIEW? Thanks, Ingo
  18. 1 point
    @Jim Kring Just tried it out. I downloaded and installed from the download link from option A, which installed 1.0.0.155 again. Then VIPM said there was an update available which installed 1.0.1.176. I entered my email address and was prompted for an offline activation. The link took me to the form with all of my information pre-filled (nice touch!) and I was able to activate with no issues! All good here now. Thanks for the quick fix
  19. 1 point
    Hi Jim, thank you the error has gone.
  20. 1 point
    The design palette shows up every time I open a LabVIEW project, is it the intended behavior? And is it possible to change this? Cheers
  21. 1 point
    Hi @Antoine Chalons. Can you please try out the new 1.0.1 release and let us know if this resolves your issue. I think we've fixed it, and would love to hear your feedback.
  22. 1 point
    I am getting this error when I start labview (2018 64bit). If I even do a search for that file I don't find it anywhere
  23. 1 point
    Yes, when the DP shows up as I open a project it is pinned. See attached video : I have a small project already open with the main.vi running Then open a DQMH project >> DP shows up pinned Untitled.mp4
  24. 1 point
  25. 1 point
    I'm having the same issue, looking forward to a fix.
  26. 1 point
    Hi Jim Yes i am able to use the palette if not scrolling. It is not freezing after a period of time. Below are also some observations: The palette will freeze if I: Select "System theme" from the combo box (the classic and flat works fine) Maximize the palette The palette will NOT freeze if a I scroll with a limited number of controls shown (for example when filtering to show only boolean controls)
  27. 1 point
    Hello JKI, I found two issues on your recent release of JKI Flat UI controls V2.0. Those details are follows, 1. When I changing to true state on settings control, it shows different image instead of settings image. 2. When I try to enter values on numeric controls, the cursor hover expending beyond that control size. Typically, the cursor hover size would be within the numeric control size. I hope, these information's may help to improve changes on your Flat UI controls V2.0 Regards, SABARI SARAVANAN M
  28. 1 point
    I ran across a problem in a project where, after creating and initializing the class under test in the setUp VI, unbundling it in the test VI returns a default object rather than the one I instantiated. setUp.vi testCount.vi I've attached a project with the class under test (ListImp) and two test cases. Both test cases have (as near as I can tell) identical setUp code and identical code in the test method (testCount). However, one test passes while the other test fails. Any idea what's causing this? [Edit - The about box reports "version 3.0.1.294 (Feb 11 2019)".] [Edit 2 - Another piece of potentially relevant information is the Test_ListImp..._2 test class was brought forward from an older version of VI Tester. I don't know what version, but according to my repository it was sometime before Feb. 2013. The other test class (the one that passed) was created with the current version of VI Tester.] VI Tester Error.zip
  29. 1 point
    Can i Link this case structure viewer to my existing case structure. i already created one VI using Enum based state machine.Now i want to convert it to JKI state machine.is there any possibility to convert with minimum changes instead of re-implementing.
  30. 1 point
    Hi JKI team, Firstly I want to thank you for generating the REST toolkit for LabVIEW, it seems pretty easy to connect the IoT cloud. I do, have some glitches when using it. I came across to this youtube demo ( Are you able to make an example to show how to use the tool? If that takes a while, would you please comment on 1. What's the input of Base URL? I used "api.favoriot.com" in my case. 2. Do you define the apiKey in one of the Default Headers? I did this but didn't seem to get anywhere. Your help is appreciated.
  31. 1 point
    I have installed LABVIEW 2019, and I followed the procedures to make sure VIPM can communicate with VIPM 2018.0.0f2: https://support.jki.net/hc/en-us/articles/214135683-Resolving-issues-with-VIPM-connecting-to-LabVIEW But, still I do not see LABVIEW 2019 listed within the VIPM window: Any clue on how o solve this? Thanks
  32. 1 point
    Hello everyone, Fist of all thank you for your Tools that are very helpfull. I'm trying to use the HTTP JKI REST drivers with an HTTPS website but I need to go trough a Proxy. How is it possible to desribe the PROXY settings with this driver? Thank you by advance.
  33. 1 point
    Hello! Where can I download the latest versions of the state machine and the state machine editor as a vip file (there is no Internet access on that computer)? Or maybe you can get out of any directory when installing via vipm? https://github.com/JKISoftware/JKI-State-Machine/releases? here?
  34. 1 point
    Open "Compare to Constant.xnode" with a text editor. Near the bottom, delete the two items "Untitled 4 (SubVI)" and "Untitled 5 (SubVI)" Then it will build.
  35. 1 point
    single step sounds good - and should work in both direction Last/Next Step dynamic state generation - maybe JSON imported State"Objects" (export fct would be nice 2)
  36. 1 point
    Hi all, I have faced an issue with JKI VI Tester. Here are the details.. I am creating a DOM reference in "Setup.vi" and bundling it into my TestCase Object. DOM reference can be created by using "Load.vi" from XML Parser palette(attached image-> XML Parser palette and DOM Ref.png). When I unbundle it in the test VI, the DOM is reset to '0'. It is getting lost. We digged into the VI Tester and found out that some deprecated property nodes are used in "_JKI Toolkits\VI Tester\TestCase.llb\CallTestMethod.vi" in order to pass data from one VI (Setup VI) to another VI (Test VI).Refer to attached images -> VI Tester_Set Control.png, VI Tester_Get All.png. When the DOM reference is flattened it is getting lost, because LabVIEW doesn't know how to convert DOM reference into flattened data type. We have done a quick internal fix by replacing the property nodes and using variant to data after getting the control value. These changes are shown in "VI Tester_Set Changed.png" and "VI Tester_Get_Changed.png". Also, in "_JKI Toolkits\VI Tester\TestCase.llb\WaitOnTestComplete.vi", we have replaced the property node when parent data is written to child class indicator. This change is shown in "WaitOnTestComplete.png". I am getting my DOM reference in test VI correctly after doing this change. As I said this is a quick fix done for internal purpose. If this is the right change to make it work, can you please make this change and distribute the package so that my customers can also use it. If this is not the right change to be made, please suggest us how to fix this. Also, let me know if you can fix this issue and and release the fixed version. Please let me know if any other information is needed regarding this. Thanks, Bhargavi Gowri.
  37. 1 point
  38. 1 point
    Hi @JimKring, I have moved to the approach of creating the DOM reference in setUp.vi of Test Suite. I will let you know if I face any problem. For now, Thanks, Bhargavi Gowri.
  39. 1 point
    Hi @JimKring I have attached the sample project, which demonstrates the issue that I am facing. I have also attached the image, which shows the DOM ref values in New.vi of test suite and setUp.vi of the test case. Please let me know if you need any details. Thanks, Bhargavi Gowri. Sample Code.zip
  40. 1 point
    Hello, I am having trouble loading tests. When VI tester starts it doesn't find my tests. I can manually load 1 test by File/Open File or test class. I can't load multiple tests. I have my classes in folders. Do the test classes need to be in the top level of my project? I have them in a auto populating folder called "Unit tests? Thanks Dan
  41. 1 point
    @Jim Kring I realize that this comment is almost 8 years later, but I can confirm that the UI does not appear to find any tests in classes contained in auto-populating folders.
  42. 1 point
    @Robert Smith I know this is four years later and probably not very helpful, but I just used VI Tester for the first time and found that my tests would not appear in the UI if the test classes were in auto-populating folders. This may have been your problem. Hopefully this helps someone else who might come across this thread.
  43. 1 point
  44. 1 point
    It would be great if there is a preview window along with the description editor. Right now, after formatting the description with various tags (like bold/italics etc.,) I would need to build the package in order to see the formatting. If there is a preview pane along with the description, it would easy to see the final formatting. Thanks, Ajay.
  45. 1 point
    I've got a problem with JKI SM Editor (JKI SM ver. 2018). In one case, it increases the CPU resources consumption. The procedure is as follow: 1. Open New VI or existing VI with JKI SM. 2. Open block diagram. 3. Open JKI SM Editor. 4. Close front panel of the VI. CPU usage increases - in my case (i5-4210M) up to 38 - 40%. Have to reset the LabVIEW. Has anyone observed silmilar behaviour? [Update: This has been fixed in version 2018.0.1.36 of the JKI State Machine package, which has been published and is available for download and installation using VIPM.]
  46. 1 point
    Yep, the new version works well. Many thanks!
  47. 1 point
    We figured it out -- it was getting an error during Macro Exit (shutdown), that was causing it to go into the error handler, which was going into Macro Exit (an infinite loop). You can work around this issue by tweaking the code inside the JKI SM Explorer window to look like the following. (You can open the JKI SM Explorer then press Ctrl+Space to stop the VI, then Ctrl+M to go into Edit mode). Update: This has been fixed in version 2018.0.1.36 of the JKI State Machine package, which has been published and is available for download and installation using VIPM.
  48. 1 point
    The issue is because I renamed the event case to "Idle" from "" (empty string). Renaming the case name will resolve this issue.
  49. 1 point
    Hi, Please help... I am trying to create a .vip that will install my LabVIEW project as a LabVIEW project template (note: I have done this process a few time before with no issues) I have my project that I want to make into a template, everything works perfectly. I configure the .vipb, I build and install the .vip. I check the destination to see if my files have installed to the correct location, they have. Here's where the problem kicks in...... I open my LabVIEW project that has installed in the destination, and notice that the .png files in my project some are missing and some are saying missing. In my project I have .png files in various .lvlibs. The first .lvlib in the project has the .png's showing, however showing as missing and the expected location is saying C:\ which is incorrect, it should be in the location where my .lvlib is in the destination. The other .lvlib's don't even show the .pngs in the LabVIEW project explorer. Now checking on disk all the png's are there and in the correct location. In summary it looks as if as part of the vip install it is removing the link the .lvproj has to my .png files VI Package Manager Version : 2018.0.0f1 Jul 21 2018 LabVIEW Version : 2016 (32 bit) OS : Windows 10 Pro Version 1803 Any help is greatly appreciated Thanks in advance. Kev
  50. 1 point
    Jim, Here is a simple example. Note it appears that also text files (and perhaps any non-LV files) are affected. The .vipb file is from 2017. Sam Simple Example.zip
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.