Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 02/27/2018 in all areas

  1. 2 points
    Get the JKI State Machine Editor (just check VIPM for package updates) Version 2013.4.0.186 This new release adds a right-click option called "Find Data Accessors" to Bundle by Name and Unbundle by Name nodes in a JKI State Machine. Using this feature will open a dialog showing all the frames of the JKI State Machine that access the data, as shown below:
  2. 2 points
    I found one problem that occurs to me. "Find Data Accessors" is available in any VI (not only JKI State Machine) for the Unbudle by Name function, but its call does not cause the appropriate list to be displayed in the dialog box, although the application is started and consumes processor resources. Calling it several times on a notebook with an i5-4210M processor results in 100% CPU load. I've attached a screenshot for the FMSM example from LabVIEW example projects. As you can see, also Add Dynamic Events and JKI State Machine Editor... are visible - only when pop-up on Bundle/Unbundle by Name.
  3. 1 point
    Hi, in our company we changed the Parse State Queue VI, so that we get the previous state in case we had an error. With this it was so much easier to debug the JKI-SM, because we were able to display the state, where the error occurred. Maybe this this an idea for the original Parse State Queue?? Here is an snippet based on the "old" Parse State Queue VI.
  4. 1 point
    Hello everyone, Fist of all thank you for your Tools that are very helpfull. I'm trying to use the HTTP JKI REST drivers with an HTTPS website but I need to go trough a Proxy. How is it possible to desribe the PROXY settings with this driver? Thank you by advance.
  5. 1 point
    Hello! Where can I download the latest versions of the state machine and the state machine editor as a vip file (there is no Internet access on that computer)? Or maybe you can get out of any directory when installing via vipm? https://github.com/JKISoftware/JKI-State-Machine/releases? here?
  6. 1 point
    Hi @Antoine Chalons. Yes, I can see how layers of nested array/cluster containers can be tricky 🙂 I'm glad you were able to figure it out, and get it working! Hope all is going well for you in general and on your LV projects.
  7. 1 point
    Open "Compare to Constant.xnode" with a text editor. Near the bottom, delete the two items "Untitled 4 (SubVI)" and "Untitled 5 (SubVI)" Then it will build.
  8. 1 point
    single step sounds good - and should work in both direction Last/Next Step dynamic state generation - maybe JSON imported State"Objects" (export fct would be nice 2)
  9. 1 point
    I had a separate QD plugin for this, but I can't find evidence that I ever shared it with the community. You've just given "ctrl+space ctrl+q" back to me. Thank you. However, mine puts it exactly eight pixels from the output tunnel and pre-wires an empty String constant... Another feature to add might be my JKI State Machine Follower. It activates the current Case Structure case while the VI is running. Maybe? You'll save me "ctrl+space ctrl+f"... Thanks for all your work on this, Jim
  10. 1 point
    Hi all, I have faced an issue with JKI VI Tester. Here are the details.. I am creating a DOM reference in "Setup.vi" and bundling it into my TestCase Object. DOM reference can be created by using "Load.vi" from XML Parser palette(attached image-> XML Parser palette and DOM Ref.png). When I unbundle it in the test VI, the DOM is reset to '0'. It is getting lost. We digged into the VI Tester and found out that some deprecated property nodes are used in "_JKI Toolkits\VI Tester\TestCase.llb\CallTestMethod.vi" in order to pass data from one VI (Setup VI) to another VI (Test VI).Refer to attached images -> VI Tester_Set Control.png, VI Tester_Get All.png. When the DOM reference is flattened it is getting lost, because LabVIEW doesn't know how to convert DOM reference into flattened data type. We have done a quick internal fix by replacing the property nodes and using variant to data after getting the control value. These changes are shown in "VI Tester_Set Changed.png" and "VI Tester_Get_Changed.png". Also, in "_JKI Toolkits\VI Tester\TestCase.llb\WaitOnTestComplete.vi", we have replaced the property node when parent data is written to child class indicator. This change is shown in "WaitOnTestComplete.png". I am getting my DOM reference in test VI correctly after doing this change. As I said this is a quick fix done for internal purpose. If this is the right change to make it work, can you please make this change and distribute the package so that my customers can also use it. If this is not the right change to be made, please suggest us how to fix this. Also, let me know if you can fix this issue and and release the fixed version. Please let me know if any other information is needed regarding this. Thanks, Bhargavi Gowri.
  11. 1 point
  12. 1 point
    Hello. I am trying to make a measurement program. Since this measurement takes a long time, it is necessary to be interrupted by the user's operation so that it can return to the measurement standby state. Is there a smarter way than inserting lots of checking the local variable of the break button during the measurement sequence?
  13. 1 point
    Hi @JimKring, I have moved to the approach of creating the DOM reference in setUp.vi of Test Suite. I will let you know if I face any problem. For now, Thanks, Bhargavi Gowri.
  14. 1 point
    Hi @JimKring I have attached the sample project, which demonstrates the issue that I am facing. I have also attached the image, which shows the DOM ref values in New.vi of test suite and setUp.vi of the test case. Please let me know if you need any details. Thanks, Bhargavi Gowri. Sample Code.zip
  15. 1 point
    Hello, I am having trouble loading tests. When VI tester starts it doesn't find my tests. I can manually load 1 test by File/Open File or test class. I can't load multiple tests. I have my classes in folders. Do the test classes need to be in the top level of my project? I have them in a auto populating folder called "Unit tests? Thanks Dan
  16. 1 point
    @Jim Kring I realize that this comment is almost 8 years later, but I can confirm that the UI does not appear to find any tests in classes contained in auto-populating folders.
  17. 1 point
    @Robert Smith I know this is four years later and probably not very helpful, but I just used VI Tester for the first time and found that my tests would not appear in the UI if the test classes were in auto-populating folders. This may have been your problem. Hopefully this helps someone else who might come across this thread.
  18. 1 point
    Ruslan, I will suggest to leverage VIPM's capability. Refer this link: https://support.jki.net/hc/en-us/articles/214135803-How-do-I-transfer-packages-with-VIPM-to-a-non-networked-computer-
  19. 1 point
    It would be great if there is a preview window along with the description editor. Right now, after formatting the description with various tags (like bold/italics etc.,) I would need to build the package in order to see the formatting. If there is a preview pane along with the description, it would easy to see the final formatting. Thanks, Ajay.
  20. 1 point
    I've got a problem with JKI SM Editor (JKI SM ver. 2018). In one case, it increases the CPU resources consumption. The procedure is as follow: 1. Open New VI or existing VI with JKI SM. 2. Open block diagram. 3. Open JKI SM Editor. 4. Close front panel of the VI. CPU usage increases - in my case (i5-4210M) up to 38 - 40%. Have to reset the LabVIEW. Has anyone observed silmilar behaviour? [Update: This has been fixed in version 2018.0.1.36 of the JKI State Machine package, which has been published and is available for download and installation using VIPM.]
  21. 1 point
    Yep, the new version works well. Many thanks!
  22. 1 point
    No, CPU usage is high all of the time. Yes, Mass Compile is enabled (always). I reinstalled JKI State Machine, but still nothing. So, I have to remember to close the Block Diagram first or JKI SM Editor (Explorer in fact...). Maybe it is important or not... my LabVIEW version is 2018 (18.0f2)
  23. 1 point
    The issue is because I renamed the event case to "Idle" from "" (empty string). Renaming the case name will resolve this issue.
  24. 1 point
    Hi, Please help... I am trying to create a .vip that will install my LabVIEW project as a LabVIEW project template (note: I have done this process a few time before with no issues) I have my project that I want to make into a template, everything works perfectly. I configure the .vipb, I build and install the .vip. I check the destination to see if my files have installed to the correct location, they have. Here's where the problem kicks in...... I open my LabVIEW project that has installed in the destination, and notice that the .png files in my project some are missing and some are saying missing. In my project I have .png files in various .lvlibs. The first .lvlib in the project has the .png's showing, however showing as missing and the expected location is saying C:\ which is incorrect, it should be in the location where my .lvlib is in the destination. The other .lvlib's don't even show the .pngs in the LabVIEW project explorer. Now checking on disk all the png's are there and in the correct location. In summary it looks as if as part of the vip install it is removing the link the .lvproj has to my .png files VI Package Manager Version : 2018.0.0f1 Jul 21 2018 LabVIEW Version : 2016 (32 bit) OS : Windows 10 Pro Version 1803 Any help is greatly appreciated Thanks in advance. Kev
  25. 1 point
    Jim, Here is a simple example. Note it appears that also text files (and perhaps any non-LV files) are affected. The .vipb file is from 2017. Sam Simple Example.zip
  26. 1 point
    Hi Ashish, I have and thank you so much for sending the link. I am happy to say that the problem is fixed and I am able to use VIPM without any issues at this moment. We use Kaspersky Endpoint Security 10 and added VIPM as an exception within Kaspersky and that is why I was unable to achieve a connection with LabVIEW.
  27. 1 point
    Is there a way to install all the packages into Labview 2018 that I already had in LV2017 (short of shift-clicking all the OpenG VI packages, then ctrl-clicking all the MGI packages and my favorite other goodies)? If it's part of VI Package Configurations, I might just upgrade.
  28. 1 point
    Sorry for my late answer, I am very bussy at work. Yes, I've tried. There a many placeholders. For examples: So, a lot of work to do. But OK. New technology (LV NXG), new philosophy, new tools... It is better to start the new project directly in NXG. But another problem in NXG 2.1. I have instaled JKI SM 2.0 and there is an option to start the new project with JKI SM. But... if I need to add JKI SM to new, empty VI I'm not able to do it. In new JKI SM project, there is also a lack of Close Reference in "Data: Cleanup" state. I am sorry for so many questions and comments, but I often use JKI SM and recommend it to my students as the next step with programming in LabVIEW (something more then a simple state machine). Regards
  29. 1 point
    Tell me where to download the latest version state machine
  30. 1 point
    I believe that you are referring to this article already to Transfer Packages to Non-Network Computer Here are the options Get VIPM on the network PC with help from IT folks OR Get temporary internet connection to the non-network PC OR Download in personal PC and then transfer to non-network PC
  31. 1 point
    @Jim C you may want to tell your coworkers to sit down when the hear about this new release... We've made another great round of improvements to the JKI State Machine Editor that we're excited to tell you about. Integrated Event Structure and Case Structure Viewer The biggest thing you'll notice is that we've integrated the Event Structure and Case Structure into a single tree view -- all of the Event Structure frames have been added under the "Idle" ("Event Structure") item at the top of the tree (as shown in the screenshot below). You can now easily navigate all the Event Structure frames and Case Structure frames from this single tree view. Drag & drop to reorder the Event frames -- it works just as you'd expect! Context Help Shows Documentation for Frames of the JKI SM If you show the Context Help window (<Ctrl+H> or Help >> Show Context Help) and then hover over a frame name in the JKI State Machine Explorer's tree view, the Context Help window will update to show the documentation string for that frame. Explore States Dialog Another cool feature we added is the ability to Explore States on a state string constant. Simply right-click on a state string constant and choose Explore States (as shown below). This will open a dialog (shown below) that looks a lot like your string constant, and allows you to click on individual lines/states of the string constant, which will navigate the JKI State Machine to that frame. This allows you to quickly jump between frames if you'd like to navigate through the sequence of states in the string constant. Grouped Right-click Options on States Finally, we added a small usability improvement where we now group all of the right-click options for a state, under a single submenu (as shown below) -- previously, these were all at the root level and started to get unwieldy. I hope you enjoy this latest round of improvements to the JKI State Machine Editor and it helps your write great code even faster.
  32. 1 point
    Thank you for giving me hope and help! Kindest Regards, Brian
  33. 1 point
    Hi Jim, THANK YOU! That link did help! Looks like all I needed was to install libXinerama.so.1 WHICH I thought I had already but not for 32 bit! Installed, as a result: Installed: libXinerama.i686 0:1.1.3-2.1.el7 nvidia-x11-drv-32bit.x86_64 0:384.111-1.el7.elrepo Dependency Installed: libX11.i686 0:1.6.5-1.el7 libXau.i686 0:1.0.8-2.1.el7 libXext.i686 0:1.3.3-3.el7 libxcb.i686 0:1.12-1.el7 Didn't require the 2015 run-time install since 2017 pro dev is installed. VIPM is happily doing its package cache download stuff as I am typing this! What a lovely sight!!!! Thank you again! Cheers, Brian
  34. 1 point
    Thanks, Jim. That's great news. I'm not sure whether it addresses Fab's concerns, but it does address mine. I'll let you know if I encounter any issues with VIPM 2017 for Linux. -Chris
  35. 1 point
    @Jim Kring Ahaaaa- in my case, that folder already existed from a previous install; and the jki.conf it contained was owned (755) by the previous user of my machine... I recursively gave myself permissions through the whole folder, which cured the error 8; however, VIPM would then launch, and die silently while still at the splash screen.. So I blow away the whole JKI folder, and everything went fine from a clean start ;-) -Thanks for your help! ~Tom
  36. 1 point
    The OpenG Array Library 4.1.1.14 is not listed in VIPM from the JKI Package Network. I even tried refreshing, but it did not find the required library. Other observations: 1. I am able to see an older version 4.1.0.13 of that library in VIPM 2. I checked the website and was able to find the latest version But I want to understand why my VIPM is not listing it
  37. 1 point
  38. 1 point
    I really like this template. It works great, is easy to use, easy to debug, keeps things well organized, etc, etc, etc. The one issue that I have with it is how it processes events. I do not like the event structure being inside the idle case. This one particular app I wrote runs test sequences consisting of multiple states back to back (essentially a macro). If the user presses the ESC key, they can interrupt the test sequence and skip to the end. To implement this, I had to poll the IDLE case in every one of the states of the test sequence to see if this event had happened. I didn't like doing that so I removed it and I thought I would share how I did it. I like this method much better because it will process the events as they happen but can also, in a way, prioritize the events. So obviously, I had to pull out the event structure and place it in its own process loop. You'll notice the UI Event queue for passing states to the state machine. Next, I create a VI that reads from the queue, with a very small timeout, and adds the event state to the front of the JKI state queue. This VI goes in front of the Parse State Queue VI so that the event is added to the font of the state queue. And within the state machine, I added a UI: Process Event state that accepts two arguments: first is the control and the second is the value associated with the control action. This works for my application but may need to be changed for other needs. Within the state, I can now determine whether to process the event immediately (as in the case of the ESC button scenario that I mentioned above) or I can choose to add another state to the end of the queue to be processed after the current queue is empty. I think this method keeps the UI responsive and doesn't require the additional requests to the IDLE states scattered throughout your program. I would definitely suggest enabling and disabling controls to only allow events to happen that make sense at that point in time. This would prevent a flood of events being added to the front of the queue if the user decides to go on a clicking spree.
  39. 1 point
    Thanks team. I have achieved the authentication using .NET. But it is little slow. Let me try some other methods and post the updates..
  40. 1 point
    I tried installing the new VIPM2017 for Linux in a clean Fedora 27 virtual machine just to give it a try but I can't get it to do anything. I followed the two basic steps: 1) install LVRTE 2015SP1 which installs without any problems or errors 2) copy JKI folder to /usr/local as described in the instruction.txt When launching vipm I just get the blunt error: No such file or directory as shown below sudo ./vipm sudo: unable to execute ./vipm: No such file or directory What could be the problem and how could it be resolved?
  41. 1 point
  42. 1 point
    One of my colleagues almost fell down; he was so happy when I showed him this new feature. Excellent idea & implementation.
  43. 1 point
    I've been tasked with trying to build packages on MacOS, but so far I have not been able to successfully build anything. The builds complete without error, but when I try to open the packages I just built they do not contain any files. I'm running MacOS High Sierra which is not explicitly supported by any version of LabVIEW at the moment, but I'm using LabVIEW 2016. Has anyone successfully built packages on High Sierra?
  44. 1 point
    Whoops, my bad. I don't really know VIPM very well. My co worker wrote: "I think you're looking at a re-packaged version of JKI VI Tester for MacOS that I made locally. VI Tester still shouldn't be available for mac through VIPM. "
  45. 1 point
    Thanks @Jim Kring for the quick response! Glad I wasn't crazy for thinking it could be done "in theory". My team is definitely in need of VIPM pro but in the near future we would need a way to automate applying vipc files during our build process. Using command line is actually great for our purposes.
  46. 1 point
    I am using a class that I want to generate an xml to archive as final data. I can't just wire the class to the easy generate xml_jki Easy.vi. so I have to use a constant cluster and unbundle and rebundle. Is there an easier way to do this. Thanx Norm
  47. 1 point
    Yes I can see the JKI packages. I noticed there appears to now be a "MacOS JKI VI Tester" package
  48. 1 point
    It worked. Only issue is when opening the visual tester it looks for some stuff from registry.llb (or dll I can't remember) and I have to ignore it, but the tester ran fine after ignoring those files.
  49. 1 point
    Perfect Jim, thanks. I'll try the workaround and keep an eye out for the fix. I'm not permitted to follow that link, is the workaround the same as Jens Gräwe suggests here?: https://support.jki.net/hc/en-us/community/posts/360000027103-Error-in-Deactivation-Infos-in-VIPM-Pro Cheers, Steen
  50. 1 point
    There are a number of items that are not adequately covered in the documentation OR (in the case of the video) actually show you the wrong way to do things. This is not intentional on JKI's part but rather the result of improvements to the VI Tester which didn't get added to the pinned getting started stuff. Important things to be aware of (tested with LabVIEW 2014 32 bit): *) Don't copy the testExample.vit as per the video as you won't be able to see your tests EVER! The .vit is a template file and the VI Tester ignores all templates. You need to right click on the testExample.vit and select "New from template" and save your VI starting with the word test and ending with .vi (not.vit) eg. test-anything.vi Rob Calhoun also makes the following important points in this post Test Cases that do not have any test methods do not appear in VI Tester hierarchy. (Maybe this is a feature, but it's not what I would expect.) After creating and saving a new test method the Test Case still does not appear in the VI Tester hierarchy. This is because the Test Case (class) has not been saved, so it still has no test methods from the point of the VI Tester Only test methods that start with the word "test" (at least this appears to be case-insensitive) are considered test methods.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.